Product Description

The Hurley H2O Dinghy Davit ® has a Sleek Euro Design, Marine Grade High-Density Polyethylene Cradles, and Stainless Steel Components, Functions as Good as it Looks, and is Impervious to Harsh Environments. Our revolutionary new stainless steel mounting system provides a quick release, leaving a very small footprint profile that could pull a barge. Each mount footprint requires only two bolts for the install and only stands 5/8″ high leaving a clear deck for any activity. Mount Covers are available.

The H2O has been designed for either soft or hard bottoms. The soft bottom model offers a wide 3″ footprint for your tender. This helps in the support of the transom where most of the weight is and is much easier on the bottom. If you start out with a soft bottom tender and upgrade to a hard bottom, no problem, remove the soft bottom pads and add the adjustable Chock Pads.

The Hurley H2O Dinghy Davit ® is easily mounted on the swim platform. This hassle-free system lets you lift and pull your dinghy on for easy storage or just push off for launching. Always available in an emergency.

Featured in the Product Showcase of the 2012 Miami International Boat Show . . .

If you have a lip on the outer edge of your platform, let us know how high it is and we will ship you free shims with your purchase. 1/4″ & 3/8″ shims available. The difficulty of retrieval depends upon the weight of your dinghy and the height of your platform off the water.

Hurley Marine, Inc. pioneered the original swim platform davit of this style back in 2002. Since the original, our research and development (R&D) team has worked to provide the consumer with the very best in design and quality for versatility and years of enjoyment. We believe that you should enjoy taking your tender along but not sacrificing your vessel’s performance. The low profile storage position on our davits provides exceptional stern visibility with none of the performance-robbing kite flying drag. There are no other dinghy davits that compare!. Make Sure it says “HURLEY” . . . Sold Worldwide!

Fill out our Davit Worksheet Form to help us determine which system and mount size would be best for you.

H2O Instruction Manual »
Davit Worksheet Form »
Dinghy Davit Gallery »

Please send us pictures once you have your new davit installed.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Properly Measuring for your Davit Mount Size

Key Dimensions Needed

A = Swim platforms internal width
B = Platforms depth (transom to edge)
C = Distance from top of platform to the water
D = Beam of dinghy

To determine which mount system will work best for you, measure the beam of your dinghy, divide by 2 and add 4 inches. Now measure your platform (transom to the end).

You must add a number below to your platform length figure in order to determine which mount to use.

Example: If your dinghy width is 60″ then divide by 2 + 4″ = 34″. Swim platform is 32″. By adding 2″ to the platform this would make it equal to the dinghy width of 34″ so then you would have chosen the 6″ mount.

• 0 – 2″ for the 6″ Mount
• 2″-4″ for the 8″ Xtensions
• 4″-6″ for the 10″ Xtensions
• 6″+ for the 36″ Xtensions

Hint: 4 inches of the mount must be used to secure to the platform.

If you have a lip on the upper edge of your platform, let us know how high it is and we will include free shims with your purchase.

If your having problems determining the right mount size, fillout our Davit Worksheet Form or give us a hail at 1.906.553.6249